Complaint Review: Eric Gorr Forward Motion Racing

Below in bold is what I paid for, I sent my assembled cylinder away and recieved another one in return. What I recieved was cracked and only partially welded. It says the package deal includes powervalve service, mine was taken out, modified, but put back in dirty.

I had to take it back apart to clean it because it didn't move due to the carbon build up. When doing this I found that a $1.80 seal was reused, it was dried up and didn't even fit tightly any more.

It may not seem like a big deal to some people but this was very time sensitive, I needed the parts to get this together to give as a gift. I had to use it, the crack leaks, the seal leaks.

This guy changes his story every time I talk to him, he will not even let me buy my old cylinder back. It was in far better condition than the one he sent me.

Here is the powervalve mechanism right out of the box http://i12.photobucket.com/albums/a220/1975xbody/IMG_0008.jpg

http://i12.photobucket.com/albums/a220/1975xbody/IMG_0009.jpg

Here is the powervalve slide. http://i12.photobucket.com/albums/a220/1975xbody/IMG_0013.jpg

http://i12.photobucket.com/albums/a220/1975xbody/IMG_0015.jpg

http://i12.photobucket.com/albums/a220/1975xbody/IMG_0017.jpg

The crack that was not on my part.

http://i12.photobucket.com/albums/a220/1975xbody/IMG_0004.jpg

Not fully welded, it leaks at this crack.

http://i12.photobucket.com/albums/a220/1975xbody/IMG_0003.jpg

Crack close up.

http://i12.photobucket.com/albums/a220/1975xbody/IMG_0034.jpg

The dried up $1.80 seal taken out of my cylinder.

http://i12.photobucket.com/albums/a220/1975xbody/IMG_0019.jpg

Seal should be a tight fit in the cylinder, but it just falls out of it's bore.

http://i12.photobucket.com/albums/a220/1975xbody/IMG_0007.jpg

Screen shot of the service I paid for and did not receive.

http://i12.photobucket.com/albums/a220/1975xbody/2-STROKEPORTING.jpg

This is Forward Motions master price list of the biggest selection of big bore kits available by any engine builder in the motorcycle industry. All of these kits include these services and parts.

For 2-stroke engines, the package deals include;

• Cleaning and disassembly
  
• Iinspection and measurement
  
• Over-boring
  
• Porting
  
• Replating
  
• Diamond honing
  
• Head mods
  
• Powervalve service
  
• Piston and gasket kits.

POWERVALVE SERVICE
Powervalves are built into the cylinder around the exhaust port. Theyre supposed to make the exhaust port bigger when you twist the throttle open. Powervalves are complicated mechanisms prone to failure. We offer a service to clean, inspect, and adjust the powervalves. This service comes standard with all porting and big bore packages.