Complaint Review: Painless Wayne

 1.chips on both side of the neck pocket 2. frets are very rough 3. Neck has a grap on both sides in the body neck cavity 4. cutting cheap bendable plastic for Electronics cover-can even cut a straight line or Circle 5. Schaller Tremolo spring tensioner was installed wrong. the Springs are not straight they on an angle 6. Tremolo Routing is not right- it is to one side 7. New EMG Solderless tone replacement potentiomete and plugin. clips are bent 8. Active pickup lite - jewel light.. He sent it out... not working. 

After 5 months of waiting for my dream guitar it came with many many things wrong with it.  We did adetailed inspection of this $1500 guitar. Garbage Fake Chinese Guitar Kit Builder, Cheap Fake Custom Chinese Kit Guitars.

 Well I receive my guitar today from Wayne at painless guitars...

I've been waiting since December on this... It is true throughout this build I have asked for a lot of things because I paid a lot of money... Always telling me to relax and be patient.

Always telling me that he can do anything I dream it he can do it...
Back in March I started getting no that's not going to work......now I paid for a painted fretboard, Killswitch and a LED light... For some reason the light was too hard for him to figure out... As I took the guitar out of the case I inspected every single bit of it.... I believe I payed for clear coat.....All over the whole guitar there are some spots very rough that have not been coded....

Where the neck sits in the pocket there is a chip and there's gaps on both sides of the neck and pocket area..... Guitar was not ready to play out of the case... When I plugged it in all I was getting is a muffled EMG pickup....
After taking the back plate off and looking inside I noticed that the tone plug for the EMG was not pushed in all the way and the plug seems to be bent I checked it and needs to be replaced....

The red wire on the input jack was hanging by a thread.... The Floyd Rose was not installed straight it is on an angle.... The pickup does not adjust height.... The fret ends are very rough... I may have rush you but, how can you send out a guitar that does not play properly it needs tons of work..

At this point I don't even feel like bothering sending it back for a refund.... I gave you the benefit of doubt... Is it true that these are very cheap Chinese bodies and necks that you don't even cut...
So you can do some flashy Graphics that because you guys are all tattoo artist... and we love your Graphics but, for guitar setup and intonation Electronics that's another story...

All in all I'm very pissed this evening... Oh and what's up with the case you said his guitar would not fit in any other case.... This guitar fits in my Gator case and in my ESP case just fine.... Plus the case you sent me seems like it would fit a stand up bass and also it looks like it's been used.... I paid $1,500 for a piece of crap I could have went to ESP got something way way better.... Now I'm believing the stories that people told me.... Giving people less than what they paid for....